RT-824, 5908312592631
Functions
* possibility of programming 1 required temperature
* the knob located on the front panel enables setting a required temperature
* the breaker switch located on the front panel enables switching off the power supply of the whole heating system
* the input for connecting a control clock
* signalling of the heating system activation
* 2 temperature sensors: an internal one and an external one
* 3 operation modes of the regulator: operation with the internal temperature sensor; operation with the external temperature sensor; operation with two temperature sensors
* in the mode of operation with the internal temperature sensor: in case of the failure of the temperature sensor the regulator will shift to the so-called safe automatic model and will try to maintain the temperature set
* automatic switching over to the mode of operation with the internal temperature sensor in case of a failure of the external sensor
* in the mode of operation with two temperature sensors, the external sensor is the limiting one and it does not permit the temperature of 27°C to be exceeded regardless of the temperature set by means of the temperature adjusting knob
* in the mode of operation with two temperature sensors: if both temperature sensors fail, the regulator will shift to the so-called safe automatic model. Working with interruptions, the regulator will try to maintain the temperature at the level of 80% of the set temperature.
Attention!
The probe is in set with temperature regulator.
Availability date:
Power supply voltage | 230 V AC |
The executive element | relay |
Maximum load current | 16 A |
Contact configuration | 1 × NO |
Separation of the contact | NO |
Temperature regulation range | 5÷35°C |
Hysteresis | 3°C |
Accuracy of setting | 1°C |
Accuracy of measurement | ±1°C |
Temperature probe | RT45 |
Internal temperature sensor | NTC |
Terminal | pluggable terminal blocks 1,5 mm² |
Tightening torque | 0,4 Nm |
Power consumption | 0,8 W |
Working temperature | -5÷50°C |
Dimensions | front: 83,5×83,5 mm; gł.22 mm , tył Ø50; gł.27,5 mm |
Assembly | in a flush-mounted box Ø60 |
Ingress Protection Marking | IP20 |