LE-01MW, 5902431672304
Functioning
The built-in real-time clock allows energy consumption to be measured with 4 tariff zones.
The meter is equipped with RS-485 communication interface with Modbus RTU protocol allowing remote reading and configuration
of the meter.
Conformity
MID Directive 2014/32/EU
Certificate 0120/SGS0571
Characteristics of the device
Functioning
The LE-01MW meter precisely measures the amount of consumed electricity under the influence of flowing current and applied
voltage. Power consumption is indicated by the flashing LED. In addition, the meter measures the parameters of the supply
network and the temperature of its own system. The values are indicated cyclically on the LCD display. The display is active when the indicator power is on. The meter operates in the communication network as a Slave device. The communication takes place in accordance with the Modbus RTU standard via the RS-485 serial port. The read-out values of registers after conversion give results according to the indications on the indicator display.
Measured values
Availability date:
Type | single-phase |
Installation | 1-phase, 2-wire |
ports | RS-485 |
Nominal frequency | 50 Hz |
Communication protocol | MODBUS RTU |
Compatibility | MID Directive 2014/32 / EU |
Reference voltage | 230 V AC |
Current current | 0,25÷5 A |
Maximum current | 100 A |
The minimum measured current | 0,02 A |
Counter's own consumption | 8 VA; 0,4 W |
Scope of indication of the abacus | 6 digits |
LCD backlight | YES |
Counter constant | 100; 1000; 2000 imp//(kWh/kvarh) |
Accuracy class | B |
Insulation protection class | II class |
Measured voltage | 100÷289 V AC |
overload | 30×lmax/10 ms |
Insulation | 4 kV/1 min.; 6 kV/1 μs |
Terminal | pluggable terminal blocks 25 mm² |
Working temperature | -25÷55°C |
Dimensions | 1 module (18 mm) |
Assembly | on rail 35 mm |
Ingress Protection Marking | IP51 |
Prędkość transmisji | 9600*, 19200, 38400, 57600, 115200 bps |
Parzystość | NONE*, ODD, EVEN |
Meternet PRO
The registration, remote reading and control system (internet / Ethernet / RS-485)
szkolenia
Open training in the field of assembly and configuration of the MeternetPRO system.Current date: 07/02/2019