PCU-518, 5908312592594
Functioning
Working mode:
LAGGED DEACTIVATION(A)
Until the relay is activated, the contact remains in the 10-11 position. After the power voltage is supplied (green LED U is shining), contact is shifted to position 10-12 and the countdown of the preset value „t” is commenced (red LED is shining). After the preset time „t” has been counted down, contact returns to position 10-11. The working sequence of the relay may be repeated after turning the power supply off and on.
LAGGED ACTIVATION (B)
After the power voltage is supplied (green LED U is shining), the contact remains in position 10-11 and the timing of the preset value t is commenced. After the preset time t has been counted down, the contact is shifted to position 10-12 (red LED is shining). The working sequence of the relay maybe repeated after turning the power supply off and on.
LAGGED ACTIVATION - CYCLIC (D)
The Lagged Activation mode is triggered in equal work cycles according to the preset time values.
LAGGED DEACTIVATION - CYCLIC (C)
The Lagged Deactivatin mode is triggered in equal work cycles according to the preset time values.
Attention!
Setting the time range knob regulator in the:
- ON - position with power supply activated connection of contact in position 10-12.
- OFF - position with power supply activated connection of contact in position 10-11.
Availability date:
Power supply voltage | 230 V AC / 24 V AC/DC |
Operating mode | delayed OFF, delayed ON, cyclical work |
The executive element | relay |
Maximum load current | 8 A |
Contact configuration | 1 × NO/NC |
Separation of the contact | YES |
Delay of operation | 50 ms |
Contact status indication | LED red |
Operating time - adjustable | 0,1s÷24h |
Power indication | LED green |
External potentiometer ZP-18 - connection cable | 3×0,42 mm²; l: 70 cm |
External potentiometer ZP-18 - can dimensions with a gland | 83 mm x 42 mm x 30 mm |
External potentiometer ZP-18 - height / diameter of the spindle | 30 mm / Ø6 |
External potentiometer ZP-18 - mounting hole | Ø10 mm |
External potentiometer ZP-18 - resistance | 100 kΩ |
Terminal | pluggable terminal blocks 2,5 mm² |
Tightening torque | 0,4 Nm |
Power consumption | 0,8 W |
Working temperature | -25 ÷ 50 °C |
Dimensions | 1 module (18 mm) |
Assembly | on rail 35 mm |
Ingress Protection Marking | IP20 |