CLI-02, 5908312592242
Functions
* control panel, enabling programming and the monitoring of device operation
* T input, adapted for operation with AC/DC signal, 5 to 264V amplitude and 50 Hz frequency for AC and 5kHz for DC signals
* possibility to set THRESHOLD parameter (1÷99 999 999 range), specifying the limiting number of pulses counted in a single operation cycle
* 'downward' counting mode to the selected value with zero value signaling (e.g. 9999→ 0)
* selection of input pulse edge (leading or trailing) the counter will react to
* external RESET input
* possibility of automatic local counter reset (loop mode) with possibility to set selected relay action
* relay output signaling the preset meter state (contact1C/O 8A)
* relay action selection: pulse with set time length; ON OFF or OFF ON state change
* local counter, reset using the external reset input or using RESET button
* total counter for all impulses (loop mode 0 → 99 999 999 → 0 → ... or reset using the meter configuration menu)
* digital filter, enabling the limiting of maximum frequency of the counted pulses (in order to reduce interferences on meter input)
* local and total meter state memory after supply failure
* scaling pulse values according to set multiplier or divider
* limiting access to program menu using PIN code
* setting display illumination mode
* program menu in three languages: Polish, English or Russian
Availability date:
Type | pulse counter |
Power supply voltage | 24÷264 V AC/DC |
Communication interface | NONE |
Counting input - voltage - low state | 0÷5 V AC/DC |
Counting input - voltage - high state | 10÷264 V AC/DC |
Counting input - frequency for DC signal | max. 5 kHz |
Counting input - frequency for the AC signal | max. 50 Hz |
RESET input - voltage | 24÷264 V AC/DC |
Contact load current 1xNO / NC | 8:00 AM |
The maximum value counted | 99999999 |
Terminal | pluggable terminal blocks 4,0 mm² |
Tightening torque | 0,5 Nm |
Power consumption | 1,5 W |
Working temperature | -20÷50°C |
Dimensions | 3 modules (52,5 mm) |
Assembly | on rail 35 mm |
Ingress Protection Marking | IP20 |