CZF-2, 5908312593034
Functioning
Phase collapse in at least one, optional phase or voltage unbalance between phase fixed actuation threshhold causes switching-OFF the motor. The motor switching-OFF occurs with 4 sec delay, which prevents any accidental motor disconnecting at temporary voltage drop. The re-connection will occur automatically at voltage increase of 5V above activation voltage (i.e. of value of voltage hysteresis). At occurrence of these disturbances, it is not possible to set a motor in motion. Shining of red diode LED along with simultaneous disconnecting the apparatus permanently, indicates contactor contacts damage. Reactivation of the apparatus is possible (after contact repair), after disconnecting from supply all three phases (fuses) and then, after switching-ON anew.
Availability date:
Power supply voltage | 3 × 400 V + N |
Cooperation with power generators | NO |
Phase failure / asymmetry monitoring | YES |
Phase sequence control | NO |
Contactor contact monitoring | YES |
The executive element | relay |
Maximum load current | 10 A |
Contact configuration | 1 × NO |
Separation of the contact | YES |
Voltage asymmetry | 45 V |
Voltage hysteresis | 5 V |
Switch off delay | 4 s |
Power control | 2 × LED |
Terminal | pluggable terminal blocks 1,5 mm² |
Tightening torque | 0,4 Nm |
Power consumption | 1,6 W |
Working temperature | -25÷40°C |
Dimensions | 95 mm x 60 mm x 25 mm |
Assembly | on wall |
Ingress Protection Marking | IP20 |
TrueRMS | NIE |