BIS-410-24V, 5902431670003
Functioning
The receiver is switched on after a current pulse caused by pressing any momentary (bell) button connected to the relay. The receiver is turned off after the next impulse or utomatically
after the set off time. A longer pressing of the momentary button (lasting at least 2 seconds) turns on the relay permanently. The relay will be turned off only after pressing the momentary button again (or after a power failure).
Note!
BIS-410 24 V is not compatible with backlit buttons.
The above data are indicative and will depend to a large extent on the design of a specific receiver (especially for LED bulbs, energy saving lamps, electronic transformers and pulse power supplies), switching frequency and working conditions.
Availability date:
Power supply voltage | 9÷30 V AC/DC |
Local control | YES |
Maximum AC-1 load current | 16 A |
The executive element | relay |
Contact configuration | 1 × NO |
Separation of the contact | YES |
Resistance to shock currents | NO |
Number of channels | 1 |
functionality | ON/OFFwith time switch |
Delay of operation | 0,1 ÷ 0,2 s |
Control pulse current | less than 5 mA |
Cooperation with illuminated buttons | YES |
Status memory after power failure | NO |
Turn-off time | 1÷15 min. |
Activate on time | YES |
Dedicated central control inputs | NO |
Radio control | NO |
Terminal | pluggable terminal blocks 2,5 mm² |
Tightening torque | 0,4 Nm |
Power consumption | 0,7 W |
Working temperature | -25 ÷ 50 °C |
Dimensions | Ø54 (48×43 mm), height: 25 mm |
Assembly | in a flush-mounted box Ø60 |
Ingress Protection Marking | IP20 |