AS-225, 5902431670171
Purpose
The AS-225 staircase lighting timer is a controller dedicated to the construction of a multi-point cascade stair lighting control system, in which the effect of light moving along the stairs can be achieved.
The number of controlled light points is arbitrary and requires only a sufficient number of controllers to be connected with each other.
Functions
Short press of the DOWN button will turn on the lamp number 1. After the time T set on the first controller, the lamp number 2 will
start to light up gradually. After the actuation time t of the lamp ON number 1, it will start to slowly go out. The transition from lamp 2 to lamp 3, from lamp 3 to lamp 4 and so on will be carried out in the same way.
In case of a descending from the stairs (pressing the UP button), the sequence will be reversed - first the lamp number 5 will light
up, then number 4, and so on will light up first. If you press the button for a long time, the light will remain on while the button is pressed.
Warning!
For light sources with a specific polarization (for example LED lamps) pay special attention to the correctness of the connection.
Availability date:
Power supply voltage | 9÷30 V DC |
Maximum AC-1 load current | 4 A |
The executive element | transistor |
Turn off delay Ton - adjustable | 3 ÷ 30 s |
Switch-on delay - adjustable T? | 0 ÷ 100% Ton |
Output voltage | 9÷30 V DC |
Delay of operation | less than 1 s |
Cooperation with illuminated buttons | NO |
Terminal | pluggable terminal blocks 2,5 mm² |
Tightening torque | 0,4 Nm |
Power consumption waking / working | 0,3 W/0,5 W |
Working temperature | -15 ÷ 50°C |
Dimensions | Ø54 (48×43 mm), height: 20 mm |
Assembly | in a flush-mounted box Ø60 |
Ingress Protection Marking | IP20 |
ZI-10-12P
To under plaster box. Output voltage 12 V. Power 10 W.The ZI-10-12P power supply is designed for supplying low-voltage LED lamps.
ZI-20-12P
To under plaster box. Output voltage 12 V. Power 20 W.The ZI-20-12P power supply is designed for supplying low-voltage LED lamps.
LS-LSC
Dimmer decorative LED staircase. Cover color: satin, light color: cold, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
LS-MWC
Dimmer decorative LED staircase. Cover color: white, light color: cold, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
LS-MSC
Dimmer decorative LED staircase. Cover color: satin, light color: cold, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
LS-MAW
Dimmer decorative LED staircase. Cover color: anthracite, light color: warm, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
LS-IWC
Dimmer decorative LED staircase. Cover color: white, light color: cold, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
LS-ISW
Dimmer decorative LED staircase. Cover color: satin, light color: warm, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
LS-VSC
Dimmer decorative LED staircase. Cover color: satin, light color: cold, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
DRL-12
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases.Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.Color: aluminum